Roofing Ventilation & Accessories

This continuous soffit strip vent from Timloc is ideal for roof eaves ventilation on roofs where the eaves incorporate a soffit board of between 6mm and 9mm thick.Key Features:Suitable for pitches of 15 degrees or moreEasy to fitDurableResistant to decayOverview..

..

..

..

..

One of the UK’s bestselling plastic loft access door/hatch; Timloc’s hinged 1169 range comes with the assurance of 3rd party air leakage performance testing and confirmation by BRE (Building Research Establishment).The loft entry trap’s integral anti-air leakage seal system also acts as a protective barrier to vapor and condensation.Features:Zero air leakage performance at 50Pa under positive test conditionsHelping to achieve Part L’s air leakage requirementsClean and simple design to complement most surrounding decorsChoice of standard .82, .35 and .25 U Value insulationIntegral anti-draught, vapour and condensation seal protectionQuick and easy to fitInstallation ready to install straight from the boxLightly textured finish allows for painting if requiredChoice of easy twist operated catches or secure key lockSuitable for use with Timloc telescopic loft access laddersOverview..

9" x 6" Brown Air Brick Cowl Cover Vent Blast Surface Mounted Openings, Grilles. Surface-mounted cover for openings, air bricks, grilles and vents. Protects against excessive weather conditions. Alleviates air blasts through the cavity. O/D: 10" x 6.5" Bottom edge protrudes: 23/4" U.V. stabilised against deterioration by sunlight.Overview..

A dry verge system which acts as a closure on the roof verge.Protects from:Wind upliftPest infestationWeather degradationFeatures:High QualityEasy to installOverview..

Mainly used in refurbishment, these push-in soffit vents provide a convenient method of providing ventilation through an existing soffit board. Barbed ridges on the sides of each vent grip the soffit board and hold them securely in place. Available in both white & brown.Overview..

Mainly used in refurbishment, these push-in soffit vents provide a convenient method of providing ventilation through an existing soffit board. Barbed ridges on the sides of each vent grip the soffit board and hold them securely in place. Available in both white & brown.Overview..

No need to buy expensive, bespoke profiled fillers. Flexible, self-adjusting fingers fill gaps when used with profiled tiles. Prevents entry of birds and large insects.Features:Effective, quick and easy to fitDurable and totally resistant to decaySupplied in convenient 1m lengthsOverview..

..