Search Criteria
Products meeting the search criteria
Brand: Swarfega
Part Code: CLE S 1
Swarfega Original Classic Hand Cleaner is a rapidly acting, classic, smooth green gel formula which removes ingrained oil, grease and general grime. With added conditioner which helps maintain the skin's natural moisture level to leave the skin feeling smooth after use.Features:Easy to apply and quick rinsing.1 Litre.Overview..
£18.70
Brand: Harris
Part Code: HA 101104000
For use when holding paints, spirits and other water-based substances.Features:Ideal for general painting.Holds 2 Litres.Clean with warm soapy water and dry before storage.Overview..
£1.16
Brand: Ronseal
Part Code: PN DCL
The quickest and easiest way to clean and revive timber decking. Removes unsightly dirt, grease, fungus and stains and restores naturally weathered wood. Ideal for use prior to application of a decking finish.Features:Dries in 15 MinutesMedium Odour Level4-5 m²/LtrSolvent-BasedOverview..
£16.85
Part Code: N OV 75 500
Used when concealment is required or when there is the danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.Features:Oval nails manufactured from bright steelThese nails are available in a variety of sizes and can be used for many purposes0.5kg of nails per packOverview..
£5.15
Brand: Harris
Part Code: HA 102082001
For use on exterior brick and rendered surfaces. For best results rub roller sleeve with a clean hand before use to remove any dust particles. Do not wet.Features:For painting rough and very rough surfaces.The brush is Guaranteed No Bristle Loss*For use with masonry paints.After painting with this roller, first, remove the excess paint using a multi-tool. Then, if a water-based paint has been used wash in warm soapy water ensuring all paint is removed. Finally, allow to dry naturally with the roller sleeve stood upright.If an oil-based paint has been used a specialised cleaner such as white spirit will be needed to clean the roller sleeve. Please refer to the paint tin for further guidance.Overview..
£7.70
Brand: Frank Key
Part Code: T M HR
Maul Head has a cylindrical shape and is made from high-grade rubber. Ideal for laying and levelling paving slabs and kerbing.Features:High QualityOverview..
£29.63
Part Code: N OV 65 500
Used when concealment is required or when there is the danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.Features:Oval nails manufactured from bright steelThese nails are available in a variety of sizes and can be used for many purposes500g of nails per packOverview..
£5.15
Brand: IKO
Part Code: DP H 300
IKO Hyload Trade DPC is a highly flexible polymeric sheet material, designed to be used within walls of brick, block, stonework or concrete in both solid and cavity wall constructions to prevent the passage of moisture from the ground and at all levels and it can be used vertically, horizontally as well as a cavity tray. The product can also be used as a Low-Risk Gas Protection System for hazardous ground gases such as radon, carbon dioxide and methane.Features:Under normal working conditions, the DPC material will remain effective for the design life of the masonry structureOver 40 years reliabilitySuperior flexibilityLow permeability to hazardous ground gasesComplete range of system components and preformed cloaksBBA approved (No. 95/3133) and CE marked to EN 14909:2012Overview..
£30.83
Part Code: N OV 40 500
Used when concealment is required or when there is the danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.Features:Oval nails manufactured from bright steelThese nails are available in a variety of sizes and can be used for many purposes500g of nails per packOverview..
£5.72
Part Code: FP MET BDB100
Our Bolt Down Shoe 100mm (Red) secures the post for a solid permanent fit. Bolts to a concrete or wooden base.Features:Quick and easy way to erect fencing and posts - no digging requiredDesigned to be fitted to an existing hard baseIdeal for patio fencing, decking, pergolas or car portsBolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stageHolds post base above ground level to prevent rot and decayOverview..
£13.23
Brand: IKO
Part Code: DP H 100
IKO Hyload Trade DPC is a highly flexible polymeric sheet material, designed to be used within walls of brick, block, stonework or concrete in both solid and cavity wall constructions to prevent the passage of moisture from the ground and at all levels and it can be used vertically, horizontally as well as a cavity tray. The product can also be used as a Low-Risk Gas Protection System for hazardous ground gases such as radon, carbon dioxide and methane.Features:Under normal working conditions, the DPC material will remain effective for the design life of the masonry structureOver 40 years reliabilitySuperior flexibilityLow permeability to hazardous ground gasesComplete range of system components and preformed cloaksBBA approved (No. 95/3133) and CE marked to EN 14909:2012Overview..
£11.29
Part Code: J FDI 232
Our fire doors are certified as single doors and our door suppliers are able to provide proof of performance showing the individual door successfully completed a rigorous fire test to the current standards, the certification relates to a single door and a dialogue should be undertaken with your planning and/or fire officer as to the requirements for compliance but most importantly fire door matching pairs cannot be rebated.All single fire doors must be fitted with the correct level of fire & smoke seals as well as the correct frame and hinges, sizes are overall tight and without any clearance gaps allowed for fitting.Overview..
£74.18